We may be closed on Saturdays. If planning on calling in please check if we are actually open to public ahead of time. We are only open 10am-2pm. **PLEASE NOTE: We are closed Monday 20th June, any orders placed over the weekend will be sent out on Tuesday 21st when we are back in the shop**
GlassCast 50 is a water-clear, UV resistant epoxy casting resin developed specifically to meet the demands of thick section casting - especially in contact with wood - making it the ultimate 'river table' epoxy.
Its slow-curing formulation allows it to be poured in depths of up to 50mm (25mm into wood) per layer without overheating.
GlassCast 50 has been formulated as a casting resin and not a coating resin meaning that it is water-clear even in very thick section. It doesn't, however, self-level to quite the perfectly flat, glossy finish of our GlassCast 3coatingresin and usually requires a flat and polish if a perfect finish is required on the open face.
GlassCast 50 Recommended Uses
River tables (any total thickness, 25mm per pour)
Knot/hole filling in wood (with or without pigments or effects)
Natural air bubble release - almost zero trapped air without degassing
Highly machinable - great for turning, shaping and polishing
100% solids - zero shrinkage
No odour - VOC free
How to Use
GlassCast 50 has been developed for professional users to produce the best results possible. It is not a 'craft' product and not intended for children. Before purchase, storage or use you must read the safety and technical data. Having said that, GlassCast 50 is incredibly easy-to-use and delivers fantastic results under a wide range of conditions.
GlassCast 50 is sold as a kit which includes both the resin and hardener in their correct ratios. The resin and hardener are mixed together at a ratio of two parts resin to one part hardener by volume. Because GlassCast 50 is designed for thicker castings, it needs to cure more slowly than other GlassCast resins and will take around 48hrs to cure.
GlassCast 50 is very often used for 'river tables' where the resin is poured into wood, in which case the insulating effect of the wood means that the total depth should be built-up at a maximum of 25mm per layer, allowing around 24hrs between layers. For detailed information and tips on using GlassCast to create the perfect river table, read the Resin River Table Handbook and study the GlassCast 50 technical datasheet.